|
|
|
Video
Converters
Choose
from the below items
|
|
|
| |
| Analog
to Digital Converters: |
| |
|
A/D
Analog Composite, Y/C, Component to 10-bit 4:2:2 SDI with
EDH
| The
6590 is a compact full featured high quality analog to
10-bit serial digital converter with EDH. The 6590 accepts
Composite, Y/C and Component YPbPr analog input signals
and outputs SMPTE 259M 4:2:2 270 Mbit SDI with EDH. Full
user digital proc. control, with user memory allows digital
adjustment of Gain, DC Offset, Saturation and Hue. Factory
presets enable a return to factory settings. |
|
|
FEATURES
•
High
quality low cost analog to 10 bit digital conversion
•
Composite,
Component (YPbPr) and Y/C inputs
•
Supports
Component BetaCamTM, MIITM and SMPTE/N10TM
•
Differential
inputs for power hum rejection
•
Full
10 bit A to D and Digital Video path
•
User
selectable (on/off) 75 ohm termination
|
|
•
4-Line
adaptive comb filter for Composite mode
•
Four
270 Mbit SDI 4:2:2 outputs with EDH
•
Internal
color bar generator
•
External
user configuration switches
•
Internal
user Proc. configuration control
•
Manual
or Automatic input gain control
•
Compact
rugged steel chassis |
|
SPECIFICATIONS:
Analog Input Composite, Y/C or Component (YPbPr
- BetaCamTM, MIITM or SMPTE / N10TM)
Input Type Differential:
all inputs
Termination:
75 ohm User configurable (On/Off)
Analog
Gain:
Auto or Manual mode
Return Loss: >35dB
Digital Output:
Four SDI 4:2:2 SMPTE 259M with EDH
Return Loss: >17dB
Output Jitter:
<0.14 UI measured with Color Bar input
A/D Process:
8:4:4 2X over-sampled
Resolution:
10-bit A to D and 10-bit video data path
|
|
Freq.
Resp.:
5MHz +/- 0.25dB
Diff. Gain: 1.5%
Diff. Phase: 0.6%
S/N: >52 dB
Comb Filter:
4-Line Adaptive (3LA, 3LNA)
Proc. Control:
Digital control of Gain, DC, Saturation & Hue
with User values saved and Factory presets
Electrical Length:
Composite mode Comb on 3.2 H, all other
modes 1.2H
Power:
5V @ 0.6 Amps, Optional 12Volt input
Size 5.5" x3" x1" (139 x77x26mm) |
|
| |
| Digital
to Analog Converters: |
| |
Serial
Digital 4:2:2 to Analog Composite, S-Video, Analog Component
Encoder
| The
6040 is a high quality full 10 bit digital encoder for
converting 525/625 4:2:2 component serial digital (SMPTE
259M compliant) to analog NTSC/PAL composite with S-Video
or analog component video. The user can select component
RGB, YPrPb in BetaCam™, MII™, or SMPTE/N10 levels. |
|
|
FEATURES
•
Automatic
NTSC/PAL detect and configuration
•
7.5
IRE pedestal |
|
•
Color
or monochrome select
•
Color
bar generator |
|
SPECIFICATIONS:
Input Equalization:
1000’ Belden 8281
Input
Return Loss:
> 15 dB at 270 Mbit
Frequency
Response:
0-5.0 MHz +/- 0.25 dB
K-Factor:
< 1%
SCH
Phase: <0.9 degrees
Differential
Gain: <0.8%
Differential
Phase: <0.8%
|
|
S/N:
>72 dB
Chroma Luma Delay: < 2 ns
Output
Return loss: >35 dB
Operating
Temperature Range:
40-100 degrees F.(non-condensing)
Power
Required:
+5V @ 0.7 amps
Output:
DAC Quantization 10 bits
Input:
Signal Processing 10 bits
|
|
|
Monitoring
Grade Converter 4:2:2 Series Digital Video to Analog
| Auto
NTSC/PAL configuration. Adds setup for NTSC. Override
jumpers for manual operation for the following functions:
Auto setup, NTSC, PAL, Setup, Monochrome output, and VBI
blanking. Very cost effective 4:2:2 SDV to analog composite
converter. |
|
|
FEATURES
•
Automatic
and manual, NTSC/PAL detect
•
Configurable
or automatic 7.5 IRE pedestal
|
|
•
Color
or monochrome select
•
VBI
blanking select
•
Built
in test modes |
|
SPECIFICATIONS:
Input:
Serial Digital Video ITU R601 4:2:2
SMPTE 259M-C/270 Mbps
Auto selecting NTSC/PAL
Input return loss greater than 20 dB
Output:
Analog Composite Video auto selecting
NTSC (9525/60) SMPTE 170M
PAL (625/50) ITU 624-4
Frequency response 0-5 MHz +/- 0.5 dB
|
|
Power:
+5V DC at 0.35 amps
Locking coaxial-type power connector
AC adapter UL/CSA approved
Input: 110-240 VAC 60/50 Hz
Output: +5V DC at 1.0 amp
Size:
3.5" x 2.75" x 0.75" (mounting tab 0.5"
x 3.25")
|
|
Questions
about Video Converters?
Call (949)
367-1700 or
email us at: sales@d-co.com
|
Specialty Video Products 
Scheduling Software | Site Map | Broadcast Automation